Cream of the Crop 22/Cream of the Crop 22.iso/os2/twp130.zip/TWKPLACE.HLP

OS/2 Help File | 1996-10-18 | 49KB | 1,396 lines

ΓòÉΓòÉΓòÉ 1. Cover ΓòÉΓòÉΓòÉ

                               Traveling Workplace
                                  Version 1.30
                   Copyright (c) Syntegration Inc. 1995, 1996.
                              All Rights Reserved.
                              3811 Schaefer Ave #J
                             Chino, CA 91710, U.S.A.
                               Tel: [phone]
                               Fax: [phone]
                         email:[e-mail]


ΓòÉΓòÉΓòÉ 2. License Agreement and Limited Warranty ΓòÉΓòÉΓòÉ

This program, including its code and documentation, appearance, structure and
organization is a product of Syntegration and is protected by copyright and
other laws. Title to the program or any copy, modification or merged portion of
the program shall at all times remain with Syntegration.

LICENSE - The following restricted rights are granted:

You may:

 1. Use the Program only on a single computer. The Program may be transferred
    to and used on another computer as long as the program is de-installed from
    the original computer, and under no circumstances be used on more than one
    computer at a time.

 2. If you purchased an Enterprise Edition license for this Program, you may
    use the Program on as many computers as you have licensed.

 3. Transfer the Program with this license to another person, but only if the
    other person agrees to accept the terms and conditions of this agreement.
    If you transfer the Program and License, you must at the same time either
    transfer all copies of the program and its documentation to the same person
    or destroy those not transferred. Any transfer terminates your license.

 4. Include the program as part of a system that you resell. If you include the
    program as part of another system you must include this license agreement,
    acknowledge our copyright in your system documentation, and comply with the
    transfer clause.

YOU MAY NOT:

 1. TRANSFER OR RENT THE PROGRAM OR USE, COPY OR  MODIFY THE PROGRAM EXCEPT AS
    PERMITTED IN THIS AGREEMENT.

 2. DECOMPILE, REVERSE ASSEMBLE OR OTHERWISE REVERSE ENGINEER THE PROGRAM.

 3. REPRODUCE, DISTRIBUTE OR REVISE THE PROGRAM DOCUMENTATION.

LIMITED WARRANTY

EXCEPT AS SPECIFICALLY STATED IN THIS AGREEMENT, THE PROGRAM IS PROVIDED "AS
IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.

Syntegration warrants that the disk on which the Program is furnished will be
free from defects in materials and workmanship under normal use for a period of
90 days from the date of delivery to you.


ΓòÉΓòÉΓòÉ 3. Traveling Workplace ΓòÉΓòÉΓòÉ

The Traveling Workplace is a tool you can use to backup, restore, and maintain
OS/2 workplace images. You can save workplace images as archive sets on a
floppy diskette, on your local hard drive, or on a network file server.

The Traveling Workplace automatically saves the files that define the settings
and icons on an OS/2 desktop. You can select additional files to be saved with
the Workplace Image. These additional files will then be recovered when you
restore an archive set. You can restore a desktop if the original files are
later damaged, corrupted, or changed.

If you want to maintain different desktops for each user who access a
workstation, Traveling Workplace can immediately restore a workplace image.
Immediate means you don't have to shutdown and restart your computer to make
the restored workplace active.

The Traveling Workplace allows you backup a desktop from one workstation and
restore the same desktop on another workstation. With this capability user's
can move from one workstation to another and get their own desktop.

As an End user you can share your workstation with your children and others
without giving them access to your sensitive applications. How about
configuring a games only workplace.

Network Administrators can provide different workplaces for each of your users
or user groups and restore there desktops if they get corrupted. We mean
hands-off restore without taking a trip out to the workstation. With the
Traveling Workplace the possiblities are endless.

For details, select from the list below:

   o How desktops are defined
   o Saving the workplace
   o Restoring an archived workplace
   o Switching to another workplace
   o Selecting additional backup files
   o Archive Location
   o Preferences
   o Selecting a log file
   o Start-up parameters
   o Portability considerations


ΓòÉΓòÉΓòÉ 3.1. How desktops are defined ΓòÉΓòÉΓòÉ

An OS/2 Desktop consists of three elements. These are a User Profile, a System
Profile, and a desktop directory including its subdirectories. The User profile
is usually named C:\OS2\OS2.INI. The System Profile is usually named
C:\OS2\OS2SYS.INI. The desktop directory is usually named C:\DESKTOP. These
names are not actually required. The User Profile is defined in the CONFIG.SYS
file using the USER_INI environmental variable. The System Profile is defined
in the CONFIG.SYS file using the environmental variable SYSTEM_INI. The desktop
directory name is defined in the System Profile.

Your can have as many desktops resident on your system as you have hard disk
space. In fact OS/2 Warp installs two desktops on your boot drive when you
install it. The first is your main desktop, and the other is the Maintenance
desktop. To switch from one desktop to another all you have to do is change the
USER_INI, and SYSTEM_INI environmental variables and reset the workplace.

The Traveling Workplace switches desktops automatically for you when you
restore an archived workplace. The included Workplace Reset function also
allows you switch from one resident desktop to another by selecting new user
and system profiles or by selecting from a list of on-line workplaces.

With multiple resident desktops on a workstation you can provide one for each
user or user group who would access the system. With the Traveling Workplace
switching between them is painless.

Traveling Workplace lets you restore a desktop without necessarily disturbing
the resident desktops on your system. In fact, Traveling Workplace lets you
manage up to 36 resident desktops.

See Also:

   o Saving the active workplace
   o Restoring an archived workplace
   o Switching between on-line workplaces


ΓòÉΓòÉΓòÉ 3.2. Saving the workplace ΓòÉΓòÉΓòÉ

You can save the active workplace into the current archive directory by
selecting the backup command from the Workplace menu or from the tool bar. The
Traveling Workplace will backup the active desktop as well as the additional
files you selected.

Usually the progress window will display the files and directories as they are
being saved. If you selected a log file these messages will be written to this
file at the same time. Error messages are also displayed in the progress window
and written to the log file.

When the backup is complete the Traveling Workplace will update the list of
archives workplaces in its main window.

Unattended or background operation.

You can invoke the backup operation automatically from a command prompt, REXX
program, or from a specifially configured object icon. Your would do this by
using the /BACKUP parameter along with any combination of the /LOC, /RSP,
/NOLOGO, /NOPROMPT, /MAXREVS, and /LOG parameters.

See Also:

   o Restoring an archived workplace
   o Start-up parameters
   o Preferences
   o Additional backup files


ΓòÉΓòÉΓòÉ 3.3. Restoring the workplace ΓòÉΓòÉΓòÉ

You restore a workplace by selecting one from the list of archived workplaces
and invoking the restore command from the workplace menu or the tool bar. The
Traveling Workplace will restore the archived files associated with the archive
set you selected, then restart your workplace to use the restored desktop. The
restore procedure can be customized through the preferences window.

Usually the progress window will display the files and directories as they are
being restored. If you selected a log file these messages will be written to
this file at the same time. Error messages are also displayed in the progress
window and written to the log file.

The workplace restore procedure can be non-destructive. Traveling Workplace
will assign new names for the User profile, System profile, and the Desktop
directory leaving the active files unchanged.

Traveling Workplace works in a replace mode when the Workplace Shell not
active. In this case, the backup user profile, system profile, and desktop
directory will be replaced. Replace mode is available if you change the
RUNWORKPLACE Environment variable to something other than PMSHELL.EXE. (ie.
CMD.EXE).

If the desktop slot is available Traveling Workplace restores the desktop to
its previous name. For instance, suppose the archived desktop was named
C:\DESKTOP1 and this desktop is not active then Traveling Workplace deletes the
directory and profiles before restoring. This practice reduces the work and
reduces the potential for interference with the workplace shell.

When the restore is complete, the Traveling Workplace will reset the workplace
to switch from the active workplace to the restored workplace. The original
CONFIG.SYS is also saved in a new file called CONFIG.TW?. This behavior does
not apply to the additional files restored. The additional files in the archive
directory will overwrite the originals.

If you prefered to cleanup the old workplace files after the restore is
complete the Traveling Workplace will delete them. When you turn off the
cleanup after preference you will create an additional resident workplace each
time you restore an archived workplace. Traveling Workplace will allow you to
create up to 36 resident workplaces in this way. After the maximum number of
resident workplaces are exceeded the Traveling Workplace will re-use the oldest
non-active workplace.

If you prefered to re-use the default names the Traveling Workplace will
recreate these files and directories if they do not exist.

The Traveling Workplace automatically updates your CONFIG.SYS file if that
preference was selected.

Unattended or background operation.

You can invoke the restore operation automatically from a command prompt, REXX
program, or from a specifically configured program object icon. Your do this by
using the /RESTORE parameter along with any combination of the /LOC, /RSP,
/NOLOGO, /NOPROMPT, /REV, /UPDATE, /REUSE, /CLEANUP, /PORTABLE, and /LOG
parameters. You should note that the /RSP option is a handy way to combine
these parameters without needing to specify them on the command line.

See Also:

   o Saving the workplace
   o How desktops are defined
   o Preferences
   o Additional backup files
   o Archive Location
   o Start-up parameters
   o Portability considerations


ΓòÉΓòÉΓòÉ 3.4. Create Desktop ΓòÉΓòÉΓòÉ

The Workplace New function lets you create a new workplace. New desktops give
you a fresh start on construction of a custom desktop for users. You can also
create a desktop when you restore a workplace by removing the Clean up after
Restore preference.

To create a new desktop:

  1. Select Workplace / New... from the menu.
  2. When the Workplace Create Window appears enter a User Resource File and a
     System Resource file.
  3. press the Create pushbutton.

 Traveling Workplace performs a MAKEINI on the User Resource File to Create a
 new User Profile. If you Specify a System Resource file Traveling Workplace
 performs a MAKEINI to create a new System profile.

 The User Resource file is required, but the System resource file is optional.
 If you do not specify a System resource file, Traveling Workplace will copy
 the active system profile and reuse it. The System resource file contains
 things like Printer driver information, Workplace class information, and
 System handles. This information may be handy for your new desktop. In fact
 you will lose some Workplace shell class information if you specify a new
 System Resource file. Workplace classes may be registered by applications you
 install. Unless you really want to create a Clean desktop do not specify a
 system resource file.

 You can also create another workplace by using the /NEW start-up parameter
 along with /URC and /SRC. for example, Create a desktop by entering the
 following command from the command prompt.

   TWKPLACE /NEW /URC=C:\OS2\INI.RC /SRC=C:\OS2\INISYS.RC /NOUPDATE /NOREUSE

 If you copy and edit the INI.RC file with a text editor or the Object Editor
 you can control the objects that will appear in the new desktop. We have
 provided an example file (BLANKDSK.RC) of how a blank desktop resource file
 will look. However, It is better to use the INI.RC that was installed on your
 computer as a starting point. The Object Editor can read the INI.RC and write
 it back as a new Desktop Resource file. Here is an example Command file
 fragment that can create a desktop in an unattended mode. Just change the file
 names to suit you needs.

  TWKPLACE.EXE /NOPROMPT /NEW /URC=C:\SWP\DATA\NEWDESK.RC

 Suppose you want to create a minimal desktop that contains a subset of the
 objects that are normally created by the OS/2 System. Follow this procedure.

  1. Start the Object Editor and open the INI.RC file (ie. File/Open/Desktop
     Resource File)
  2. Save the INI.RC to another name. Lets say you used NEWDESK.RC.
  3. Remove the objects you do not require. Do not remove the desktop line.
  4. Save the NEWDESK.RC file.
  5. Start the Traveling workplace and select (Workplace/New) from the menu.
  6. Specify the NEWDESK.RC file as the User Resource file.
  7. Leave the System Resource file blank.
  8. Press Create.
  9. Magic happens.

 Refer to the Object Editor on-line help and the "Customizing the OS/2
 Workplace" on-line reference. These documents contain information you will
 find very handy.

 HAVE NO FEAR. You can always switch back to the existing desktop. IF YOU FEAR
 then go to the preferences window and uncheck Update CONFIG.SYS and Reuse
 Default Names Traveling Workplace gives you maximum safety when experimenting
 with this operation because you can fall back to an archived workplace or
 switch to another desktop.


ΓòÉΓòÉΓòÉ 3.5. Workplace Reset ΓòÉΓòÉΓòÉ

The Workplace Reset function restarts the Workplace Shell. At the same time,
you can switch desktops by specifying new file names for the USER_INI and
SYSTEM_INI environment variables.

Traveling Workplace uses this function to let you switch between on-line
workplaces. To switch to an on-line workplace:

  1. Select a workplace from the list of on-line workplaces.
  2. Press the reset button or select Workplace / Reset... from the menu.
  3. When the Reset Window appears press the Reset pushbutton.

 You can also switch to another on-line workplace by using the /SWITCH start-up
 parameter along with /USR and /SYS or /DESKTOP. for example, switch to the
 default desktop by entering the following command from the command prompt.

   TWKPLACE /SWITCH /DESKTOP=Desktop


ΓòÉΓòÉΓòÉ 3.6. Archive Location ΓòÉΓòÉΓòÉ

The Archive Location window lets you select a directory for saving and
restoring workplace images. Use the drive and directory list boxes to navigate
to the directory of your choice, or type in the directory name.

To create a new directory just type the name into the entry field provided. The
Traveling Workplace will automatically create the directory the next time you
perform a backup.

The archive directory is inspected to create the list of archive sets display
in the main window. The Traveling Workplace maintains the files in the archive
directory. You should not independently change or delete any files in the
archive directory.

Multi-user archives.

You should maintain a separate archive directory for each user. for instance,
Sally uses C:\ARCHIVE\SALLY, Mike uses C:\ARCHIVE\MIKE, KARA uses
C:\ARCHIVE\KARA, and so on...

The /LOC startup parameter allows you to set the archive directory when the
program starts. This overrides the directory you specified here.


ΓòÉΓòÉΓòÉ 3.7. Selecting additional backup files ΓòÉΓòÉΓòÉ

The additional files window allows you select files to save. These files are
saved along with the user profile, system profile, and the desktop directory
when a workplace image backup is performed. These files are also restored along
with the workplace image.

Select the Add... button to add a file or files to the list. wild card file
specifications are accepted.

Select an item from the list then press the Delete... button to remove it from
the list.

Select the Default button to initialize the list with the default set of
additional files.

When you are done press the OK button to save your changes.


ΓòÉΓòÉΓòÉ 3.8. Discovering Desktops ΓòÉΓòÉΓòÉ

When a lot of restore activity takes place in the background the list of
on-line Workplaces may become inconsistent with the desktops that actually
reside on your hard disk. The Workplace/Discover menu item is provided to allow
you to search your hard disk for desktops.

The procedure inserts the desktops it finds into the list of on-line
workplaces. If a desktop is already in the list with incorrect information, the
procedure will update the information.

The discover desktops procedure can be useful when you want to delete
unnecessary desktops.


ΓòÉΓòÉΓòÉ 3.9. Workplace Rename ΓòÉΓòÉΓòÉ

The Workplace Rename function is activated from the Workplace menu.

Use this option to rename an item in the list of on-line workplaces. You can
enter a new name up to 40 characters long.

Besides its use as a title in the list of on-line workplaces, the workplace
name can also be used to specify the desktop on the command line. The is
achieved through the /DESKTOP startup parameter. The /DESKTOP startup parameter
is only used when you also specify the /SWITCH startup parameter. If you plan
to use the /DESKTOP startup parameter, then you should select a relatively
short name that does not include spaces.

See also:

   o Start-up parameters
   o Switching to another workplace


ΓòÉΓòÉΓòÉ 3.10. Workplace Icon ΓòÉΓòÉΓòÉ

The Workplace Icon function is activated from the Workplace menu.

Use this option to create an icon that lets you switch between on-line
workplaces. Before selecting this function you must first select an item from
the list of on-line workplaces. When you activate this function Traveling
Workplace creates a program object on the active desktop.

When you double click or open this new object the Traveling Workplace initiates
a workplace reset to switch you to the selected workplace.

Use the Workplace icons you create to assist you with multi-user setup.

See also:

   o Start-up parameters
   o Switching to another workplace
   o Multi-user Setup


ΓòÉΓòÉΓòÉ 3.11. Selecting Preferences ΓòÉΓòÉΓòÉ

The Preferences window lets you select options used during backup and restore
processing. Your options are described below:

 On-line Workplaces
    Using the up or down arrows select the maximum number of resident desktops
    you want to allow on your workstation. Traveling Workplace will remove the
    oldest workplace from your workstation when the maximum number is exceeded.
    The default workplace is not considered in this count and will not be
    reused unless it was removed manually or by a cleanup after operation.

 Archive Generations
    Using the up or down arrows select the number of generations you want to
    maintain in an archive directory. Traveling Workplace will remove the
    oldest archived files from this directory when the allowable number of
    generations are exceeded.

 Update CONFIG.SYS
    Check the update button to automatically update your configuration file
    after restoring a workplace from the archive. If you leave the update
    button unchecked, then the workplace you restore will not remain active
    after you shutown and restart your computer. Traveling Workplace will allow
    you to change your mind after performing a restore. You can manually update
    the CONFIG.SYS file by selecting the Update Configuration... command from
    the Workplace Menu.

 Cleanup desktop files after restore
    Check the cleanup button to remove the old user profile, system profile,
    and desktop directory after restoring an archived workplace. The cleanup
    after operation is not available unless you allow CONFIG.SYS updates. Leave
    this option unchecked if you want to create multiple resident desktops.

 Re-use default names on restore
    Check the Re-use button to allow Traveling Workplace to use the default
    names when you perform a restore. In any case Traveling workplace will not
    re-use the default names if the default files exist.

 Ensure Portability on restore
    Use this button to run the portability check on a restore. The portability
    procedure has not been defined as of this writing. You can gain additional
    control over portability by using the Copy User Applications and the Copy
    System Applications features. If you have portability concerns contact our
    technical support staff. We will be happy to assist you with establishing
    portable restore settings for your environment.

 Reset Workplace After Operation
    This button refers to the Workplace restore, Workplace create, and
    Workplace switch operations. Check this button to allow the Traveling
    workplace to reset the workplace Immediately after performing the
    operation. Uncheck this button if you want to defer the workplace reset
    until after a reboot. For example, Check the Update CONFIG.SYS option and
    Uncheck the Reset Workplace option if you want to perform a restore but
    defer the switch until after a system reboot.

 Copy User Applications
    With the Copy User Applications list you can select application data that
    you want to copy from the active user profile to the restored user profile.
    This mechanism will allow you to keep data from the active desktop that may
    be more current than the archived workplace. You can also use this list to
    maintain portability when restoring a workplace that was backed up from a
    different workstation.

 Copy System Applications
    With the Copy System Applications list you can select application data that
    you want to copy from the active system profile to the restored system
    profile. This mechanism will allow you to keep data from the active desktop
    that may be more current than the archived workplace. You can also use this
    list to maintain portability when restoring a workplace that was backed up
    from a different workstation.

 See Also:

   o How desktops are defined
   o Restoring an archived workplace
   o Saving the active workplace
   o Start-up parameters
   o Portability considerations


ΓòÉΓòÉΓòÉ 3.12. Selecting a Log File ΓòÉΓòÉΓòÉ

The Log File window lets you select a file to be used for writing messages
during the backup or restore procedures. A log file can be useful for auditing
if you run the program in an unattended mode or from the command line.

Use the list boxes to help you navigate the directories and find an existing
file.

To create a new logfile simply type the name directly into the file name field.

The Log file can also be specified through the /LOG command line option or from
a response file


ΓòÉΓòÉΓòÉ 3.13. Progress Log ΓòÉΓòÉΓòÉ

The progress log window appears when you run Traveling Workplace in the
interactive mode. The interactive mode is disabled by specifying the /NOPROMPT
command line option.

This window gives you details about the operations performed by the Traveling
Workplace. The OK is disabled while the operations are being performed.


ΓòÉΓòÉΓòÉ 3.14. Start-up Parameters ΓòÉΓòÉΓòÉ

By specifying options, you can start the Traveling Workplace to backup the
active workplace, restore an archived workplace, switch between resident
workplaces, create a new workplace, or perform these operations in an
interactive mode. The Traveling Workplace can run in a number of different
modes. These are:

     o Unattended mode runs invisibly in the background.

     o Single operation mode with Progress Log window visible.

     o Interactive mode with main window visible. All operations are controlled
       manually.

 You can specify start-up parameters in any of the following ways:

     o In the Parameters field of the Program page of a Traveling Workplace
       object's settings notebook.

     o On the command line of a OS/2 Window or OS/2 Full Screen command prompt.

     o In a CMD file or program. Use the same syntax as for a command prompt.

 The command syntax is as follows:

 TWKPLACE [ options ]

 The following options are allowed.

     /NOLOGO
        Do not display the initial product information window.

     /NOPROMPT
        Use this option to start the Traveling workplace to run invisibly in
        the background. This option is ignored unless you select /RESTORE,
        /BACKUP, /SWITCH, or /NEW at the same time. If you specify this option
        then /NOLOGO is assumed.

     /LOC[=ArchiveLocation]
        specifies the directory containing the archived workplace images.

     /LOG[=LogFile]
        logs all operations to the specified logfile. If no log file is
        specified the program will write to TWKPLACE.LOG in the current
        directory.

     /NOAUDIT
        disables logging operations and removes the log file selection.

     /PROF=ParamDir
        specifies the directory containing the parameter profile. This file is
        named TRAVELWP.INI. The program reads parameters from this file and
        saves parameters to this file.

     /BACKUP
        backups the current active desktop to the archive directory. This
        option causes the program to run in single operation mode unless the
        /NOPROMPT parameter was also specified.

     /RESTORE
        restores a workplace image from the archive directory. This option
        causes the program to run in single operation mode unless the /NOPROMPT
        parameter was also specified.

     /SWITCH
        Switches from one on-line workplace to another. This option causes the
        program to run in single operation mode unless the /NOPROMPT parameter
        was also specified.

     /NEW
        Creates a new workplace. This option causes the program to run in
        single operation mode unless the /NOPROMPT parameter was also
        specified.

     /USR=USERINI
        Specifies the new file for the User profile. This option is ignored
        unless the /SWITCH option is also specified.

     /SYS=SYSTEMINI
        Specifies the new file for the System Profile. This option is ignored
        unless the /SWITCH option is also specified

     /URC=USERRC
        Specifies a User Resource file used to construct the new User profile.
        This parameter is ignored unless the /NEW option is also specified.

     /SRC=SYSTEMRC
        Specifies a System Resource file used to construct the new System
        Profile. This parameter is ignored unless the /NEW option is also
        specified.

     /DESKTOP=DESKTOPNAME
        Switches to the named on-line Workplace. This is an alternative to the
        /USR and /SYS options when used with the /SWITCH option.

     /REV=n
        n indicates the generation to restore. The latest backup in the archive
        directory is generation (n=0). Each older backup increases the
        generation by one. If a generation level is not specified, then the
        latest archive set is restored.

     /MAXREVS=n
        n indicates the maximum number of generations that an archive directory
        can contain. If this number is exceeded then the program will delete
        the oldest archive set after a backup is performed.

     /MAXDESKS=n
        n indicates the maximum number of on-line workplaces allowed on the
        workstation. If the number is exceeded then the program will delete the
        oldest on-line workplace before restoring. The program will not delete
        the default workplace.

     /NOUPDATE
        does not update the CONFIG.SYS file after a workplace has been
        restored. If this option is specified then the restored desktop will
        not persist when the workstation is restarted.

     /UPDATE
        updates the CONFIG.SYS file after a workplace has been restored.

     /NORESET
        Prevents Traveling Workplace from reseting the workplace shell as part
        of an operation. Valid operations are /RESTORE, /SWITCH, and /CREATE.
        Use this option when you want to perform and operation without
        immediately switching to the target desktop. You can also specify the
        /UPDATE option so that the target desktop will be used at the next
        system restart. Since some versions of the Workplace Shell are very
        hyperactive in moving unwanted information to the target desktop this
        option can be useful to delay the activation of a restored or created
        desktop until after a system reboot.

     /RESET
        Sets the Reset Workplace After Operation preference and performs a
        workplace reset immediately after a /SWITCH, /RESTORE, /CREATE
        operation.

     /CLEANUP
        causes the program to delete the previous workplace files left behind
        after restoring. If this option is specified then the CONFIG.SYS file
        will be automatically updated.

     /NOCLEANUP
        prevents the program from deleting the previous workplace files left
        behind after restoring.

     /REUSE
        lets the program re-use the default names for the User Profile
        (\OS2\OS2.INI), System Profile (\OS2\OS2SYS.INI), and the Desktop
        directory (\DESKTOP). The program will only re-use these names if they
        do not exist.

     /NOREUSE
        indicates that the default names for the User Profile (\OS2\OS2.INI),
        System Profile (\OS2\OS2SYS.INI), and the Desktop directory (\DESKTOP)
        should not be used for a restore operation.

     /PORTABLE
        causes the program to copy system specific information from the current
        user and system profiles to the restored profiles. This will ensure
        portability between different workstations. At the time of this writing
        no portability testing is defined.

     /NOPORTABLE
        ignores system specific information in the current user and system
        profiles. no portability testing is performed.

     /RSP=ResponseFile
        allows you to specify a response file. The Response file can contain
        all the options needed to perform a backup or restore operation. The
        Traveling workplace allows you to save response files that you can use
        with this option.

 The command line below invokes the Traveling Workplace to restore the latest
 workplace image from the archives located in the C:\ARCHIVE\KARA subdirectory.

    TWKPLACE /NOLOGO /LOC=C:\ARCHIVE\KARA /RESTORE

 See Also:

   o How parameters are saved
   o How response files are used
   o Where parameters are saved


ΓòÉΓòÉΓòÉ 3.15. How parameters are saved ΓòÉΓòÉΓòÉ

Traveling Workplace gets its parameters from three places. These are:

 o The parameter file TRAVELWP.INI
 o Start-up parameters
 o A Response file

 The parameter file is the main location for Traveling Workplace parameters.
 You can over-ride the values in the parameter file by using a response file.
 You can over-ride the values in a response file and in the parameter file by
 using start-up parameters. All changes and over-rides are saved in the
 parameter file.


ΓòÉΓòÉΓòÉ 3.16. How response files are used ΓòÉΓòÉΓòÉ

Response files provide a method for over-riding options that were selected in
the parameter file. They are used to control options when you are unsure of
values contained in the parameter file. Response files can also be used to
supply initial values for the parameter file before it is created.

Traveling Workplace allows you to create response files that contain the
parameters you interactively select. This feature saves you the time and
trouble of creating a response file from scratch. You can read a response file,
make changes using the Traveling Workplace facilities, then save the changes
back into the response file. Response files are easily edited and viewed with a
text editor.

Parameters specified on a command line usually over-ride parameters specified
in a response file except when you read a response file interactively using the
menu.

A response file is processed when you specify one with the /RSP start-up
parameter. Use the /RSP option along with one of the /BACKUP, /RESTORE, or
/SWITCH options for precise control of Traveling Workplace operations from a
command line.

See Also:

 o Start-up parameters
 o Where parameters are saved
 o How parameters are saved


ΓòÉΓòÉΓòÉ 3.17. Where parameters are saved ΓòÉΓòÉΓòÉ

Traveling Workplace saves its parameters in an INI file named TRAVELWP.INI.
When you start the Traveling Workplace the program searches for the parameter
file in the following order.

  1. If the /PROF start-up parameter was specified the program will use this
     directory to create or open the parameter file.
  2. If the /PROF start-up parameter was not specified the program looks in the
     User Profile for the parameter file location.
  3. If the User profile does not contain the parameter file location, then the
     TWPINI environment variable is searched.
  4. If the environmental variable does not exist then the parameter file is
     opened or created in the current working directory.

 There are two ways to set the location of the parameters file.

  1. Use the /PROF start-up Parameter to specify the parameter file directory.
  2. Set the TWPINI environment variable to specify the parameter file
     directory. This environmental variable is ignored if the User Profile
     contains the parameter file location.

 When the Traveling Workplace is initially started and the parameter file is
 located, the program writes the parameter file name into the active user
 profile. From then on the Traveling Workplace continues to retain the
 parameter file name in the active user profile. This retention persists even
 after a Workplace Restore or Reset operation. Once set, the only way to change
 the parameter file location is to use the /PROF start-up parameter.

 In an end user environment where the Traveling Workplace resides on a local
 Hard Drive the recommended place for the parameter file is in the same
 directory as the program file. The installation program will set this up for
 you automatically.

 In a network environment where the Traveling Workplace resides on a File
 Server one possible location for the parameter file is in the archive
 directory. This works if the archive directory allows read and write access to
 the user.


ΓòÉΓòÉΓòÉ 3.18. Multi-user Setup ΓòÉΓòÉΓòÉ

The Traveling Workplace gives you many ways to setup a multi-user workstation.
We suggest a few ways in this document and we expect that you will invent a few
others by using the start-up options we supply.

First of all we suggest that you maintain a separate archive directory for each
user or user group. The /LOC startup parameter allows you to set the archive
directory when the program starts.

Use the preferences window, startup parameters, or response file to prevent
updates of the CONFIG.SYS and reuse of the default names. This will allow you
to start the workstation with the same default workplace every time.

Backup the desktop, restore it, update CONFIG.SYS, shutdown, restart, then
backup it up again. This will make the desktop stable and give it a new name.
Lets say this archived desktop is DESKTOP0. Now every time you restore the
desktop will want to use the DESKTOP0 slot. Switch back to your default desktop
(DESKTOP) and update the CONFIG.SYS. Now every time you boot the workplace will
default to DESKTOP. The restore operation is clean because the DESKTOP0 slot is
available.

Now here are two scenarios for setting up a multi-user workstation.

   o Single station
   o Network station

 See Also:

   o Saving the workplace
   o Preferences
   o Start-up parameters


ΓòÉΓòÉΓòÉ 3.18.1. Single station setup ΓòÉΓòÉΓòÉ

The single station setup calls for you to start the same default workplace
every time. Create program icons on the default desktop to restore the
workplace of each user. Here is the detailed procedure.

    1. Start the Traveling Workplace.

    2. Note the names of the User profile and System profile displayed in the
       main window for later use.

    3. Backup the default desktop into the archive directory (eg.
       C:\ARCHIVE\DEFAULT).

    4. Select a new archive directory for the new user. (eg. C:\ARCHIVE\KARA).

    5. Backup the desktop again into the new archive directory.

    6. Bring up the preferences menu.

       a. uncheck the Update CONFIG.SYS button.
       b. uncheck the Reuse default names button.
       c. uncheck the cleanup after button.
       d. select about 9 archive generations.
       e. select 3 or more resident workplaces as you have users.
       f. Press the OK button.

    7. Save a response file into the new user's archive directory
       (eg.C:\ARCHIVE\KARA\KARA.RSP). Note this name for future reference.

    8. Restore the new user desktop. If you followed previous instructions the
       the default workplace will remain intact.

    9. Now we want to create an icon that will allow you to return to the
       default desktop. Open the templates folder and drag a program template
       from the folder and drop it on the desktop.

   10. When the setting window appears enter the following information.

       a. Go to the program page. You should already be there.
       b. Enter Traveling Workplace path and file name into the path an
          filename field (eg.C:\SWP\BIN\TWKPLACE.EXE).
       c. Enter "/SWITCH /USR=C:\OS2\OS2.INI /SYS=C:\OS2SYS.INI" into the
          parameters field. Leave the quotes out. if the User profile you noted
          in step 2 is different then use the name you noted instead of
          C:\OS2\OS2.INI. If the System profile is different the use the name
          you noted instead of C:\OS2\OS2SYS.INI.
       d. Leave the working directory blank. It does not matter.
       e. Go to the General page and type Logoff in the title field.
       f. Chose the reset icon provided if you desire. This icon (RESET.ICO) is
          located in the \BIN subdirectory of the Traveling Workplace's install
          directory.
       g. Close the setting window.

   11. Now we want to create a program that will allow the user to backup their
       own desktop. Drag another program template from the templates folder and
       drop in on the desktop.

   12. When the setting notebook appears enter the following information.

       a. Go to the program page. You should already be there.
       b. Enter Traveling Workplace path and file name into the path an
          filename field (eg.C:\SWP\BIN\TWKPLACE.EXE).
       c. Enter "/BACKUP /RSP=C:\ARCHIVE\KARA\KARA.RSP" into the parameters
          field. Leave the quotes out.
       d. Leave the working directory blank. It does not matter.
       e. Go to the General page and type "Workplace Backup" in the title
          field.
       f. Chose the backup icon provided if you desire. This icon (BACKUP.ICO)
          is located in the \BIN subdirectory of the Traveling Workplace's
          install directory.
       g. Close the settings window.

   13. Make any additional changes you desire. You may want to delete any
       objects you want to prevent the new user from accessing.

   14. Close the templates folder.

   15. Again backup the new workplace into the user archive directory to save
       your changes.

   16. Select the Logoff icon you just created to switch back to the default
       desktop.

   17. Now we want to create a program icon on the default desktop that will
       allow you to restore the new user's desktop Open the templates folder
       and drag a program template from the folder and drop it on the desktop.

   18. When the setting window appears enter the following information.

       a. Go to the program page. You should already be there.
       b. Enter Traveling Workplace path and file name into the path an
          filename field (eg.C:\SWP\BIN\TWKPLACE.EXE).
       c. Enter "/RESTORE /LOC=C:\ARCHIVE\KARA" into the parameters field.
          Leave the quotes out.
       d. Leave the working directory blank. It does not matter.
       e. Go to the General page and type Kara's Desktop in the title field.
       f. Chose the restore icon provided if you desire. This icon
          (RESTORE.ICO) is located in the \BIN subdirectory of the Traveling
          Workplace's install directory.
       g. If you purchased and installed The Secure Workplace from Syntegration
          then you can assign a password to this object.
       h. Close the setting window.

   19. Repeat this procedure for each user.


ΓòÉΓòÉΓòÉ 3.18.2. Network station setup ΓòÉΓòÉΓòÉ

The Network station setup calls for you to start the same default workplace
every time. When the user logs-on restore their workplace. When the user
logs-off, backup their workplace. Each environment has its own considerations.
Therefore you should refer to the command line start-up parameters to implement
the backup and restore procedures to fit your requirements.

Archive location considerations

You should maintain a different archive directory for each user or user group.
This prevents workplace images from being mixed up. As an administrator you
make the drive assignments. If you want to maintain a unique desktop for each
user then you should assign the user's archive directory as a subdirectory of
their home drive. If you want to maintain a unique desktop for each user group
then you should assign a drive letter that will point each user group to a
different archive directory. For example, say drive L: contains the archive
directory. User group A would have one drive L: assignment and User Group B
would have a different Drive L: assignment. For the purposes of this example
lets assume that the archive location is L:\ARCHIVE.

Preference considerations

In network environment we want to the workstation to boot to the same default
desktop no matter who was last logged on. We also want the default desktop to
contain a logon icon that will start the logon procedure. Here is the setup
procedure.

    1. Start the Traveling Workplace.

    2. Bring up the preferences window.

       a. uncheck the Update CONFIG.SYS button.
       b. uncheck the Reuse default names button.
       c. uncheck the cleanup after button.
       d. Allow about 9 archive generations.
       e. Allow at least 3 resident workplaces.
       f. Press the OK button.

    3. Backup the default desktop into the archive directory (eg.
       C:\ARCHIVE\DEFAULT).

    4. Change the archive location to the network archive L:\ARCHIVE

    5. Backup the desktop into the user's archive directory

    6. Restore the desktop so it uses a name other than the default
       (eg.DESKTOP0).

    7. Backup the desktop again. Now the archived desktop uses a name other
       than the default. When the user restores it the slot should be
       available.

    8. Save the parameters to a response file that you can modify later.

    9. Create an icon that starts the logon procedure. If you network operating
       system has preinstalled a logon icon then use it.

   10. Cleanup the default desktop by deleting any objects that the user should
       not access before logon. You may want to create a default desktop that
       has nothing but a logon icon. Traveling Workplace can create a new
       desktop for you.

 Logon considerations

 After a user logs-on, we will restore his workplace from the archive
 directory. We do this in his logon script. Each network operating system
 implements logon scripts in different ways. LAN Server's logon script is
 called PROFILE.CMD. Insert the following command line in the user's logon
 script.

   TWKPLACE /NOPROMPT /LOC=L:\ARCHIVE /RESTORE /NOREUSE /NOUPDATE

 You could use the /RSP start-up parameter instead to reduce the size of the
 command line.

 Logoff considerations

 When the user logs-off we may want to backup any changes he made to the
 workplace. We also want to switch back to the default desktop to allow the
 next user to logon. Since most network operating systems do not have logoff
 scripts we should create a logoff icon on the user's desktop. the logoff icon
 could start a command file or REXX program that performs the backup and then
 logs the user off. Here is a sample command file that backs-up, logs-off, and
 switches.

   @ECHO OFF
   TWKPLACE /NOPROMPT /LOC=L:\ARCHIVE /BACKUP /MAXREVS=9
   LOGOFF.EXE
   TWKPLACE /NOPROMPT /SWITCH /USR=C:\OS2\OS2.INI /SYS=C:\OS2\OS2SYS.INI
   EXIT

 In the case of user groups we probably do not want to automatically backup
 changes that any one user makes. If this is the case, then you do not need to
 perform a backup before the use logs-off. One side benefit to this strategy is
 that the user gets the same desktop every time he logs-on.

 Maintenance considerations

 Sometimes administrators need to deploy new workplace configurations. That
 task becomes easy when the archive directory is on a File Server. here is a
 procedure that will allow you to modify a User or User group workplace.

  1. Start the Traveling Workplace.

  2. Change the archive location to point at the user's archive directory.

  3. Switch to a desktop that does not have the same name as the archived
     desktop.

     The archived desktop name is written on the second line of the progress
     log. You want to allow the users desktop the keep its name (ie.Slot).

  4. Restore the workplace from the archive.

  5. Make the required changes to the desktop.

  6. Wait a minute to allow the User Profile or System Profile to get updated.

  7. Backup the workplace to the archive.

 Next time the user logs-on his desktop will be updated.

 OS/2 V3.0 and later takes proactive steps to maintain system handle
 information. When Traveling Workplace has to rename the desktop by updating
 object and system handles the possibility of clashes is high. Once you have
 gotten the desktop to use a new name try your best to maintain it. The
 "Frequently Asked Questions" document has more information on this topic.


ΓòÉΓòÉΓòÉ 3.19. Portability considerations ΓòÉΓòÉΓòÉ

Portability could be an issue if you plan to backup a desktop on one machine
and restore it on another. In a homogeneous environment where the hardware and
software is the same Portability is not a problem. Hardware differences such as
Microprocessor types, Hard drive types, Floppy drive types, serial ports, and
parallel ports do NOT make a computer different as far as OS/2 and the
Workplace configuration is concerned. Again, if these are the only differences
then you need not be concerned with portability.

The Traveling Workplace allows you to painlessly experiment with restoring
workplace images you backed up on another machine. You can do this by turning
off the clean-up after restore and Update CONFIG.SYS preferences. When you
perform a restore in this way the existing workplace image is left intact. To
switch back to the original workplace just select it from the list of on-line
workplaces and press the reset button. If the restored image is unsatisfactory
delete it.

If one or more of the following conditions apply to the source and target
machines the restore procedure may not work well without cogent customization.

   o Different version of the OS/2 operating system.
   o Different display device drivers.
   o Different installed printer drivers.
   o Different sound card drivers.
   o Different installed fonts.
   o Different application software.

 The following discussion addresses the main types of hardware and software
 differences. We will try to offer solutions that will help you to customize
 the restore procedure when portability becomes an issue.

 Mice

 The mouse driver is configured in the CONFIG.SYS. If you have mice that use
 different drivers then as long as you do not restore the CONFIG.SYS as an
 additional file then you need not be concerned with portability.

 Hard Drives, Floppy Drives, and CD-ROM Drives

 The same argument for mice applies to CD-ROM drives. You need not worry about
 hard drives or floppy drives because the Drives folder dynamically creates an
 object for each available drive when you activate it. Thus, even if the
 restored drives folder is initially incorrect, the Workplace shell will
 self-correct the objects when the folder is next opened.

 Video display cards

 The video display drivers are configured in the CONFIG.SYS file. Inspect the
 CONFIG.SYS file to determine if the display driver references are different.
 If they are different then you should not backup the CONFIG.SYS from the
 source machine and restore in on the target machine. sometimes display device
 drive parameters are stored in the User Profile (OS2.INI) or the System
 Profile (OS2SYS.INI). Inspect the applications listed in the Preferences
 window. Select the applications you believe to be related to the display
 driver. Some experimentation is required here. Once you believe you have the
 right set of applications try the restore. You should be looking for
 applications with names like PM_DISPLAYDRIVERS, WIN_RES_*, PM_IBMBGA, or
 PM_IBMXGA. By copying the application data from the active profiles to the
 restored profiles you will effectively be transfering the information the
 workstation needs to run on the target machine.

 Printer drivers.

 If the target machine does not have a printer driver to support a printer
 object backed up from the source machine then you have a problem. The solution
 is simple. Install the driver on the target machine before restoring the
 workplace image. If the target machine has more drivers than the source
 machine you have no problem. Both the User Profile and the System profile
 contain information needed by the system to manage printers. If the printer
 port assignments on the source machine are different to the ports assignments
 on the target machine then the application data may need to be copied from the
 active profiles to the restored profiles.

 Sound cards.

 The sound drivers are configured in the CONFIG.SYS file. Inspect the
 CONFIG.SYS file in the source and target machines. If the sound card drivers
 are different then you should not backup the CONFIG.SYS from the source
 machine and restore in on the target machine. Multimedia PM configuration
 information is stored in the \MMOS2\MMPM.INI file. This information is not
 backed up or restored unless you selected the file as an additional backup
 file. In this scenario the target machine will retain its MMPM configuration.

 Installed fonts.

 If the source machine has fonts that the target machine does not have then you
 have two alternatives. You could install the missing fonts on the target
 machine before performing a restore or copy the font information from the
 active user profile to the restored user profile. The copy applications
 preferences allow you to do this during the restore procedure. The
 applications are "PM_fonts", an "PM_Font_Drivers". Perhaps the best approach
 is to ensure that all of your machines have the same fonts.

 Application software

 The target machine should have access to at least the same application
 software as the source machine. The software should be installed in the same
 drive and directories on both machines. If this were not the case, then the
 objects in the restored workplace would point to non-existent locations.
 Obviously you would not want to restore a workplace to a target machine that
 has none of the same software.

 Network software

 Both the source machine and the target machine should have the same network
 software installed. The arguments for application software apply.

 Network adapter cards

 Network adapter drivers are usually configured in the CONFIG.SYS file. Inspect
 the CONFIG.SYS file in the source and target machines. If the network adapter
 drivers are different then you should not backup the CONFIG.SYS from the
 source machine and restore it on the target machine.

 OS/2 version differences.

 The User profile and System profiles have slight differences with different
 versions of the OS/2 Operating System. Your might be able to backup and
 restore workplaces between V2.1 and V2.11. You might have the same luck
 between Warp Fullpack and Warp for windows. Warp Connect is a different
 animal. In general we suggest that you upgrade and maintain all your machines
 at the same version of the operating system. If you must restore a workplace
 onto a target machine with a different OS/2 version then we recommend that you
 inspect the application data in both the user and system profiles. Use the
 copy applications capability in the preferences window to copy data from the
 active profiles to the restored profiles.

 See Also:

   o Preferences
   o Selecting additional backup files
   o Start-up parameters


ΓòÉΓòÉΓòÉ 3.20. The Menu ΓòÉΓòÉΓòÉ

The following pages describe The Workplace Image Archiver's Menu options.


ΓòÉΓòÉΓòÉ 3.20.1. Workplace Menu ΓòÉΓòÉΓòÉ

The Workplace menu contains commands that you use to backup and restore
workplace images. The following commands appear in the menu:

 Backup              Stores the current workplace into the archive directory.

 Restore             Restores the selected workplace archive set.

 Remove Archive      Removes the selected workplace archive set from the
                     archive directory.

 Delete              Deletes the selected on-line workplace.

 Save response file  Save the backup and restore parameters in a file

 Read response file  Reads parameters from a file.

 Update Configuration Updates your CONFIG.SYS file after last restore


ΓòÉΓòÉΓòÉ 3.20.1.1. Workplace Backup ΓòÉΓòÉΓòÉ

Use the Backup command to store the current workplace into the archive
directory. For more information see Saving the workplace


ΓòÉΓòÉΓòÉ 3.20.1.2. Workplace Restore ΓòÉΓòÉΓòÉ

Restores the selected archive set. From more information see Restoring an
archived workplace


ΓòÉΓòÉΓòÉ 3.20.1.3. Workplace Target ΓòÉΓòÉΓòÉ

Displays an information panel that tells you where the selected archive will be
restored. The information depends on the active desktop, the archived desktop,
the number of allowed on-line workplaces, and the Re-use Default Names
preference. The target is usually the same as the archived desktop unless the
archived desktop directory is the same as the active desktop directory.
Restoring an archived workplace


ΓòÉΓòÉΓòÉ 3.20.1.4. Remove Archive Set ΓòÉΓòÉΓòÉ

The Remove Archive command lets you delete the files associated with the
selected archive set. This option cleans up the archive directory and frees
disk space.


ΓòÉΓòÉΓòÉ 3.20.1.5. Workplace Delete ΓòÉΓòÉΓòÉ

The Workplace Delete command lets you delete the selected on-line workplace.
This option deletes the user profile, system profile and desktop directory
associated with the workplace. Traveling workplace will not allow you to delete
the active workplace.


ΓòÉΓòÉΓòÉ 3.20.1.6. Save Response File ΓòÉΓòÉΓòÉ

The Save Response File command lets you select a file for saving the program
parameters. this response file can be used later to run the Traveling Workplace
in an unattended mode or from a command prompt.

See Also:

Startup Parameters


ΓòÉΓòÉΓòÉ 3.20.1.7. Read Response File ΓòÉΓòÉΓòÉ

The Read Response File command lets you select a parameter file that was
previously saved. Traveling workplace will replace its' current parameters with
the parameters in the response file.

See Also:

Startup Parameters


ΓòÉΓòÉΓòÉ 3.20.1.8. Update Configuration ΓòÉΓòÉΓòÉ

Use Update Configuration to manually update your CONFIG.SYS after restoring a
workplace. This option is available if you choose not to have the update done
automatically during the restore.

Updating the CONFIG.SYS is necessary if your want to allow the restored
workplace to persist after system shutdown.


ΓòÉΓòÉΓòÉ 3.20.2. Options Menu ΓòÉΓòÉΓòÉ

 Options Menu


ΓòÉΓòÉΓòÉ 3.20.2.1. Archive Location ΓòÉΓòÉΓòÉ

The Archive location command lets you select a new directory for saving and
restoring Workplace Images. For more information see selecting the archive
location.


ΓòÉΓòÉΓòÉ 3.20.2.2. Additional files ΓòÉΓòÉΓòÉ

The Additional files command lets you select files to backup. These files are
saved along with the user profile, system profile, and the desktop directory
when a workplace image backup is performed. For more information see selecting
additional backup files.


ΓòÉΓòÉΓòÉ 3.20.2.3. Preferences ΓòÉΓòÉΓòÉ

The Preferences... command lets you select options for managing the Workplace
backup and restore procedures. For additional information see selecting
preferences.


ΓòÉΓòÉΓòÉ 3.20.2.4. Log File ΓòÉΓòÉΓòÉ

The Log File command lets you select a file to be used for writing messages
during the backup or restore procedures. A log file can be useful for auditing
if you run the program in an unattended mode or from the command line. For more
information see selecting a log file.


ΓòÉΓòÉΓòÉ 3.20.2.5. Disable log file ΓòÉΓòÉΓòÉ

The Disable log command lets you remove the log file selection. When you remove
the log file auditing will no longer occur. You can re-initiate auditing by
selecting a new log file.


ΓòÉΓòÉΓòÉ 3.20.3. Help Menu ΓòÉΓòÉΓòÉ

Use the choices on the Help menu to display:

   o An index of references to the help topics for the active program

   o General information about the contents of the active window

   o General information about the help facility

   o A list and description of keys you can use

   o Product information for the active program.


ΓòÉΓòÉΓòÉ 3.20.3.1. Help For Help ΓòÉΓòÉΓòÉ

To get information on a particular item, place the cursor on the item then
press the Help Key (F1).


ΓòÉΓòÉΓòÉ 3.20.3.2. Keys Help ΓòÉΓòÉΓòÉ

Accelerator keys


ΓòÉΓòÉΓòÉ 3.20.3.3. Help for Help Index ΓòÉΓòÉΓòÉ

Use the Help index to display an alphabetical list of references to help topics
in the active program.

You can select an index entry to display the Help topic related to that index
entry.


ΓòÉΓòÉΓòÉ 3.20.3.4. Help for Help Table of contents ΓòÉΓòÉΓòÉ

Use the Help Contents to display the on-line help table of contents.


ΓòÉΓòÉΓòÉ 3.20.3.5. Product Information ΓòÉΓòÉΓòÉ

Select this menu item to display the product information window.